1. Firstly you need to bring the screen up. Use the beige turning knob to the left of the AMP (Audio Equipment). Turn the switch to the right to bring the screen up. Please note you will need to hold the switch there until the screen has finished ascending. 

 


2. Next to turn the screen on you will need to use the projector remote. Press the red button in the top left to turn the projector off. Please note you will need you have the remote in direct view of the projector to turn it on (Not from behind the curtain).


3. Now you will need to turn the audio equipment off (The AMP). To turn the equipment on do the following; Press the button on the back right of the top deck. (Circled in green). The deck lights will turn off.

4. Then below this click the two switches on the lower two consoles (Circled in purple).